BASF — The Chemical Company

Emaco^® Nanocrete R2 is ideal for:

• cosmetic repairs on buildings and structures especially where hand reprofiling is necessary, e.g. balcony and beam edge repairs
• minor damage repairs on pre-cast panels
• general repairs where fast setting is needed
• smoothing large areas to achieve aesthetic finish e.g. prior to painting

Useful facts

• pack size: 20 kg
• water addition: 3.5 to 4.0 litres per bag depending on use
• usage rate: 1 x 20 kg bag covers 1.3 m² at 10 mm thick
• open work time: 30 to 45 minutes at 21 ºC
• finishing time: with sponge or similar approx. 60 to 90 minutes
• minimum application temperature: > 5 °C
• shelf life: 12 months in unopened sacks
• curing: in hot, dry or windy conditions ensure correct curing

Technical data

• shrinkage compensated, polymer modified, fibre reinforced and contains nanotechnology to minimise shrinkage and possibility of cracking
• compressive strength > 25 MPa at 28 days
• low elastic modulus to reduce differential stresses on low strength concrete structures

Multi-use repair product with superb application properties

• superb application properties and feel on the trowel
• lightweight 20 kg sack for easy handling
• smooth, creamy but non-slump mortar
• can be applied horizontally, vertically and overhead
• excellent high build capability:
• 80 to 100 mm in one layer by hand in vertical patches
• 70 to 80 mm overhead
• Tip: for improved build thicknesses apply bond or contact layer of mortar or Emaco^® Nanocrete AP using special Emaco^® Nanocrete brush
• Levelling coat: minimum layer thickness 3 mm
• perfect for reforming corners or other profiles without formwork
• multi-use material for convenience on site:
• can also be used as a large area fairing coat to level out surfaces
• perfect for cosmetic repairs prior to painting
• fast setting: can be overcoated in only 4 hours at 21 ºC
• saves time and labour costs on the job site